PB Heat MI User Manual download pdf (Page 20)

ELECTRICAL

2. Intermittent Ignition (see Figure 6.3 above)

a. The vent damper is continuously powered. On a

call for heat, limit relay R is energized, which

energizes:

●

the circulator (when used) through contact

R1, and

●

the vent damper operator through contact R2,

provided that the high-limit aquastat switch is

closed.

The damper operator opens the vent damper.

b. Once the damper is proven open, the ignition

circuit within the gas valve energizes, provided

that all of the following conditions are met:

●

the blocked vent switch is closed, and

●

the flame rollout switch is closed.

c. When the call for heat ends:

●

Limit relay R de-energizes, which opens

contacts R1 and R2.

●

The circulator shuts down.

●

The gas valve de-energizes.

●

The vent damper closes.

d. If temperature exceeds limit setting, main burners

shut off and circulator continues to operate.

Figure 6.3: Wiring and Connection Diagram – Intermittent Ignition

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 42 43

No comments

PB Heat MI User Manual Page 20